Accuracy: | ±5% of reading, ±1count at calibration frequencies |
Alarm/PowerConnector: | 15-pin Female "D"connector |
Alarms: | Alarm Set Point:1.3, 1.4, 1.5, 1.6, 1.7, 1.8 to 1 |
Altitude: | Up to 3000 metersabove sea level |
Connector: | Monitor Ports:Female N, TNC or BNC |
ContactRating: | 100 VDC @ 0.5A |
Coupling: | Monitor Ports: -63dB approx., Subject to changes in full-scale power |
Dimensions: | 4.75" (121mm) wide,(7.55" (192mm) with connectors), 4.2" (107mm) high, 1.06" (27mm)deep |
Directivity: | 30 dB, 136-960 MHz ;26 dB, 960-2400 MHz |
EMC: | European Standard EN61326-1:1997 + Addendums A1: 1998 and A2:2001 - Electrical equip.for measurement, control and laboratory use |
Environment: | Thruline® sensor fordirect insertion in 50-Ohm line |
FrequencyRange: | 136-225 MHz, 225-520MHz, 470-960 MHz, 960-2400 MHz |
Humidity: | 0 to 95% maximum(non-condensing) |
InsertionLoss: | 0.1 dB, 136-960 MHz;0.15 dB, 960-2400 MHz |
InterfacePort: | Connector: FemaleDB-9, compatible with IBM PC AT serial port |
MaximumPower: | Section Power:Dependent on frequency and connector |
MeasurementRange: | ACM: 2.5 W to 100 W;ACM500: 12.5W to 500 W |
OperatingTemp.: | 0°C to50°C |
PassiveIntermod Products: | Less than -130dBc |
PowerAccuracy: | 136-225 MHz, ± 10%;225-520 MHz, ± 8%; 470-960 MHz, ± 5%; 960-2400 MHz, ±5% |
PowerRequirements: | +11 to +26 VDC or±36 to ±72 VDC |
Protocol: | Serial RS-232, 9600baud, no parity, 8 data bits, 1 stop bit, no handshake |
RelayContact Type: | Dry, Form C, relaycontacts, common, normally open, normally closed |
Reset: | Local Mechanicalreset switch, Remote input (Reset if VDC is 0 to +0.8volts) |
RFConnector: | N or 7/16 DIN, seeACM Part Number Definition in the "Support Tools" section on thiswebpage |
Safety: | European Standard EN61010-1:2001 - Safety Requirements - Electrical equip. formeasurement, control and laboratory use - ECMRequirements |
Stimulus: | VSWR set pointexceeded, response time proportional to overload |
StorageTemperature: | -4°F to 176°F (-20°Cto 80°C) |
Visual: | Visual Alarm- RedLED will illuminate to indicate alarm |
VSWR: | 1.07, 136 to 960MHz; 1.1, 960 to 2400 MHz, N Connectors; 1.1, 960 to 2000 MHz, 7/16Connectors; 1.2, 2000 to 2400 MHz, 7/16 Connectors |
Weight: | Less than 2 lbs.(0.9 kg) |